• Drop	Stacking Height
  80 cm	15 cm
  100 cm	16 cm
  120 cm	17 cm
  140 cm	18 cm
  160 cm	19 cm
  180 cm	21 cm
  210 cm	22 cm
  230 cm	23 cm
  250 cm	24 cm

  Measurements should be width first followed by the drop
• Drop is from the top of head rail to underside of bottom bar
• Measure to the nearest 0.1 cm
• We will custom make your blinds to sizes you provide, if these are incorrect it is not possible to change your blind as they are tailor made for you

Measuring Guide – Inside Recesses

Fitting option: ‘Recess Size’

• Blinds will be installed within the window opening
• Ensure you supply us your exact measurements (Width & Drop)
• To ensure the blinds fit when brackets are affixed we will deduct 12 mm

Valance Option: ‘Standard Valance’

• We supply a valance exactly the width of the blind plus 10mm
• If “Recess option has been selected valance will be the width 12 mm + 10 mm

Inside Recess Measurements

This is when you want to fit your blind inside the window recess

• Measure width by taking width of the recess from wall to wall in at least 2 places
• Measure drop by taking measurement from top of the recess to the window sill in at least 2 places
• Alternatively measure where you wish the blind to start and finish on the window frame itself.

Measuring Guide – Outside Recesses

Mitred Returns

• Cover the side of head rail fixings
• We supply a front valance plus two sides that are cut to fit over the side of the blind head rail.
• You would order mitred returns when you can see the side of the blind/bracket

Uncut Out of the Box

• You would order these if 2 or more blinds meet
• We supply 2 metre returns and a valance that is over long, you can then cut this to provide a perfect fit

Standard Valance

• Do not cover the side of head rail fixings
• We supply a valance exactly the width of the blind plus 10 mm

Outside Recess Measurements

This is when you want to position your blind outside the window recess

• Measure the width of where you would like your blind to be
• Measure the exact drop of where you want your blind to be

Measuring Guide – Sash Windows

• We recommend positioning the blind inside the architrave
• The architrave acts as a natural frame
• Measure the width of where you would like your blind to be
• Measure the exact drop of where you want your blind to be

Measuring Guide –Bay Windows

Fitting Option: ‘Blind Size’

• You supply us with the exact width and drop measurements for where you would like the blinds to cover making allowance for bracket fittings.
• The width and drop of the blind specified by you will be overall blind size.

Mitred Returns

• Cover the side of head rail fixings
• We supply a front valance plus two sides that are cut to fit over the side of the blind head rail.
• You would order mitred returns when you can see the side of the blind/bracket

Uncut Out of the Box

• You would order these if 2 or more blinds meet
• We supply 2 metre returns and a valance that is over long, you can then cut this to provide a perfect fit

Do not position brackets too close to each other
Don’t measure from apex to apex - blinds will not fit

Fitting Guide

You should have:

• One wood slat blind
• One attachable wood valance
• Two end mounting brackets
• One centre support bracket (on blinds 100cm plus wide)
• One package of screws

Tools needed for fitting:

• Tape measure
• Drill Bit
• Drill
• Pencil
• Screw Driver
• Ladder

Fitting Instructions:

• Select your required mounting method
• Measure head rail and fix brackets allowing 0.5cm extra to ensure head rail fits
• Slide the blind head rail into the fitted brackets and snap shut the hinged doors
• Attach the wooden front valance